Copland: Difference between revisions
(→Copland D11E4: It works) |
(→Copland D11E4: Add testing notes) |
||
| Line 28: | Line 28: | ||
== Copland D11E4 == |
== Copland D11E4 == |
||
Also using the 7100/66 for this. The CD I am using is also not bootable, so I'm doing the following: |
|||
# Copy the Copland CD's version of Drive Setup to a floppy |
# Copy the Copland CD's version of Drive Setup to a floppy |
||
| Line 37: | Line 37: | ||
# Run the install script as stated in the documentation |
# Run the install script as stated in the documentation |
||
It boots, but it hangs shortly after reaching the desktop unless a debugging machine is connected. I am using a PowerBook 5300c for this. I recommend disabling the automatic breakpoints on DebugStr and code load. Use Control -> Propagate Exception if an application crashes. If an application gets in a loop, it seems like you are out of luck. |
|||
It boots, but it hangs shortly after reaching the desktop. I need to set up a debugging machine. |
|||
== External links == |
== External links == |
||
Revision as of 02:48, 24 March 2023
Copland has beaten me so far.
Copland D7E1
Haven't tested it yet.
Copland D9 "Tools Edition"
On the Power Macintosh 7100/66, at least, the CD isn't bootable. My System 7.5 CD isn't bootable either. So, I perform a somewhat modified setup procedure.
- Boot from the Mac OS 8.1 Disk Tools floppy (System Software 8.1DT3)
- Create the two HFS partitions with Drive Setup Lite
- Insert the Copland D9 CD
- Install System 7.5 to the first partition using the Copland CD's copy
- Create the
No Copland Mountfile on the first partition - Proceed as normal from there
When I boot into Copland, I get a "Failed to find main GDevice." error that I can't get past. Kickaha says my inclination that it could be related to the DB-15 adapter might be true:
All the drawing in Color QuickDraw is done through GDevice objects. If things are going correctly, the system finds all the displays, creates a GDevice for each, puts them in a list, and marks one as "current". If something goes tragically wrong, then the GDevice list will be empty or wrongly formatted. Then when a program (or even the rest of the OS) wants to start drawing, tragedy will ensue.
Gory programmer-level details at https://developer.apple.com/library/archive/documentation/mac/pdf/Imaging_With_QuickDraw/Graphics_Devices.pdf
So yes, it could be that Copland doesn't understand what to do with your VGA adapter and isn't creating a proper GDevice for it.
Copland D11E4
Also using the 7100/66 for this. The CD I am using is also not bootable, so I'm doing the following:
- Copy the Copland CD's version of Drive Setup to a floppy
- Boot from the 7.1.2 install CD
- Run Drive Setup from the floppy
- Create one HFS partition with Mac OS 8 support
- Install System 7.5 through a CD
- Run the install script as stated in the documentation
It boots, but it hangs shortly after reaching the desktop unless a debugging machine is connected. I am using a PowerBook 5300c for this. I recommend disabling the automatic breakpoints on DebugStr and code load. Use Control -> Propagate Exception if an application crashes. If an application gets in a loop, it seems like you are out of luck.
