QuickDraw™ 3D Read Me

From Computers Wiki
Revision as of 06:43, 6 January 2022 by Huntertur (talk | contribs) (Huntertur changed the content model of the page QuickDraw™ 3D Read Me from "wikitext" to "rtf": format)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

eXTGraphic __RES1000__.pict � Important Information About QuickDraw™3D

QuickDraw™3D enables your computer to display three-dimensional graphics using applications designed to take advantage of QuickDraw 3D. It also provides a common file format, called QuickDraw 3D Metafile (or 3DMF for short), for exchanging 3D documents. QuickDraw 3D also provides acceleration services which support plug-and-play accelerator cards.

For computers running the Mac®OS, the following are required to install and run QuickDraw 3D:

•a PowerPC™based computer with a minimum of 24 megabytes of memory (RAM)

•Mac OS System 7.1.2 or later

The latest version of QuickDraw 3D, along with software demos, QuickDraw 3D Metafiles, and additional information is available through the Internet at the following site:

                                           http://www.apple.com/quicktime/

Using QuickDraw 3D

The QuickDraw 3D folder includes the following applications, 3D models, and textures that allow you to explore the 3D capabilities of your computer:

•SimpleText version 1.4 and Scrapbook version 7.5.2. These applications allow you to open and interact with 3DMF models.

•A new Scrapbook File with sample 3DMF models.

•A number of 3DMF models provided by Model Masters (www.interaccess.com/modelmaster), Plastic Thought, Inc. (www.3d-active.com), Viewpoint DataLabs International (www.viewpoint.com), and Zygote (www.zygote.com).

You can expect even more applications that use QuickDraw 3D in the near future, including new versions of application programs you may already own. Contact your software vendors for more information about their plans to support this new technology.

Troubleshooting

If you try to start an application that uses QuickDraw 3D and get the message “The application ‘<application name>’could not be launched because QuickDraw 3D could not be found,”make sure that the following files are in the Extensions folder, inside the System Folder:

•QuickDraw™3D

•QuickDraw™3D IR

•QuickDraw™3D RAVE

•QuickDraw™3D Viewer

•QD3DCustomElements

If the files are there and you still get the message, it means that you don’t have enough memory to run the application. You may be able to open the application if you try the following:

• Quit other open applications.

• Reduce the amount of memory allocated to the application. This is done by:

- selecting the application’s icon in the Finder

- choosing “Get Info…”from the File menu

- typing a lower number in the boxes for Minimum Size and Preferred Size

• Install more memory (RAM).

If you are using a localized system, and you install this U.S. software, you will need to copy the Scrapbook File in the QuickDraw 3D Folder to the System Folder on your computer. Otherwise, when you choose Scrapbook from the menu, you will get an empty scrapbook. Note that this operation will replace any existing Scrapbook File in the System Folder, thus erasing any previously stored contents.

Some of the sample models included with QuickDraw 3D, such as Big Ben and Red Hatchback, are highly detailed (they contain additional 3D modeling data such as vertex normals and surface UVs) and thus will require a larger amount of memory than the other supplied models. If you experience problems when opening these files from SimpleText, you should open only one file at a time.

How QuickDraw 3D uses memory

QuickDraw 3D is a shared library. When no applications that rely on QuickDraw 3D are open, the library does not take up memory space (RAM). Once a QuickDraw 3D-based application is open, the amount of memory taken up by the shared library doesn’t increase if other QuickDraw 3D-based applications are launched. Of course, each application will take up memory according to their size and the complexity of the files being used. The memory taken up by QuickDraw 3D becomes available when you quit all QuickDraw 3D-based applications.

While a QuickDraw 3D application is open, the QuickDraw 3D library allocates memory from “temporary memory.”This memory shows up in the “About This Computer…”window as memory used by the System. When you quit the application, the memory becomes available, but the size shown in the “About This Computer…”window may not reflect this. The memory previously used by QuickDraw 3D is, nonetheless, available for other applications (it is released to the applications as needed).

Apple QuickDraw 3D Accelerator Card

If you have an Apple QuickDraw 3D Accelerator Card present in your machine, the following files will also be installed in the Extensions folder, inside the System Folder:

•Apple QD3D HW Driver

•Apple QD3D HW Plug-In

If you need to re-install these files at a later time, you can do so by launching the Installer, as described in the section below under "If you need to reinstall QuickDraw 3D", selecting Custom Install from the pop-up menu, and then selecting the Apple QuickDraw 3D Accelerator Card item in the list.

We recommend that you turn off Virtual Memory when using Apple’s QuickDraw 3D Accelerator Card.

Scrapbook 7.5.2

We strongly recommend that the Scrapbook not be used with less than 300k of memory available. To determined how much memory is available, select “About This Computer…” from the Apple menu and look at the value next to "Largest Unused Block".

If you need to reinstall QuickDraw 3D

If you need to reinstall QuickDraw 3D, follow these steps:

1. Open the “QuickDraw™3D Install”folder and double-click the Installer icon.

2. After installing QuickDraw 3D, restart your computer.

3. If you want the items in the “QuickDraw™3D Extras”folder, drag the folder to the newly-created “QuickDraw™3D Folder”inside the “Apple Extras”folder.

Removing QuickDraw 3D

If you wish to remove QuickDraw 3D, follow these steps:

1. Open the “QuickDraw™3D Install”folder and double-click the Installer icon.

2. Choose Custom Remove from the pop-up menu.

3. Click the box next to each item to put a check in it.

4. Click Remove.

5. Restart your computer.

• • • • • • • • • • • • • • • • • • • • • • • •

Copyright ©1996-1998 Apple Computer, Inc.

Apple, the Apple logo, Macintosh, and Mac OS are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. QuickDraw is a trademark of Apple Computer, Inc. All other product names are trademarks or registered trademarks of their respective holders. Mention of non-Apple products is for informational purposes and constitutes neither an endorsement nor a recommendation. Apple assumes no responsibility with regard to the selection, performance, or use of these products.