grundo

The Motorola Net6200/166 ??? (TODO: Paste the research Purple helped with)

Specs

Processor

2x PowerPC 604e @ 166 MHz

Memory

8 72-pin SIMM module slots

Hard disk

Seagate BarraCuda 4 Series 4.29 GB 7200RPM Fast Wide SCSI 1MB Cache

Display adapter

Cirrus Logic GD5446 Rev A

VRAM

2 MiB

Ethernet adapter

ZNYX NetBlaster ZX345 (SA0025)

SCSI card

Adaptec AHA-2940UW

Expansion

4 Conventional PCI slots, 3 16-bit ISA slots

Clock battery

Duracell 3V DL1/3N (one-third N)

Serial number

MP00176

Motherboard label

MLU, LX SERIES 01-07582-03 (FIREPOWER SYSTEMS INC), serial LXM01113

Quirks

• The motherboard is labeled Firepower Systems, Inc. instead of Motorola.
• When the system was first powered on, it booted enough to give a "no RAM" beep. Later attempts did not give a beep. There are four diagnostic LEDs on the board labeled A, B, C, D. When booting with RAM, light A stays on. When booting with no RAM, light C stays on. When booting with no processor card, no lights stay on. The beep no longer happens. Purple believes this may be due to the capacitors no longer being able to function properly and only managed to work for the initial power-on before becoming useless for further attempts.
• When COMM 1 is attached to serial at 19200 baud, the system prints "AbcdefgBCD", first the first seven characters, then a pause, then the last three. One time, it got to "AbcdefgBCDE" after another second pause.

Potential documentation

• https://web.archive.org/web/19970605064417/http://www.mot.com/GSS/MCG/support/hard/index.html

History

• 2023-09-09: The computer is purchased at VCF Midwest.
• 2023-09-10: The computer is temporarily transported to my parents' place.
• 2023-09-28: The computer is transported to the new home.
• 2023-12-16: 📈 The clock battery is replaced. Before replacing, it was measuring 2.9 V.
• 2023-12-16: The capacitors on multiple components are identified as bad.